FIELD & STATOR REWIND PRICE
GUIDE – July 2008
These are BASE prices for typical units. USE THIS GUIDE FOR ESTIMATING ONLY. There are adders for fine or heavy wire, very small or large, double insulated, etc. No extra charge for voltage change, but specify both "from" and "to". Call or fax for current prices. Before you call, count the slots and measure the bore and stack length. Please use our fax or email estimating form to ensure that we have all of the needed information. Please note that we have no way of knowing the price and availability of new units.
FIELDS: 2 Pole: $40-55, taped $50-65 (Small Tools); 4 Pole: $50-up
(tools, DC to 5 HP); Compensated: $75-110 (tools)
Extra charge for taps, hand wound, fine or heavy wire, special problems, etc.
Include pole shoe with DC coils. DC coils are shipped soft ('green', to be
dipped and baked in place.
STATORS: Specify speed, phases & voltage; specify
"from" and "to" if a conversion.
Send one endbell with radial arm saw stators or any
stator with tight end turn clearances.
Base Price for single speed, 1 or 2 voltage, NEMA frames with nameplate data
|
|
-- SINGLE PHASE -- |
|
-- THREE PHASE -- |
|
Radial Arm |
|||||
|
HP |
3600 |
1800 |
1200 |
|
3600 |
1800 |
1200 |
|
saw |
|
|
1/4 |
$130 |
$145 |
$160 |
|
$125 |
$135 |
$145 |
|
|
|
|
1/3 |
135 |
155 |
170 |
|
135 |
145 |
160 |
|
|
|
|
1/2 |
145 |
165 |
185 |
|
140 |
155 |
170 |
|
$245 |
|
|
3/4 |
160 |
185 |
215 |
|
145 |
165 |
190 |
|
265 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
185 |
215 |
235 |
|
160 |
185 |
215 |
|
300 |
|
|
1 1/2 |
215 |
235 |
260 |
|
185 |
215 |
250 |
|
340 |
|
|
2 |
240 |
265 |
290 |
|
215 |
245 |
275 |
|
395 |
|
|
3 |
275 |
310 |
345 |
|
245 |
265 |
300 |
|
450 |
|
|
5 |
350 |
385 |
430 |
|
265 |
300 |
350 |
|
560 |
|